PDA

View Full Version : boarding step



rocket 204
07-06-2010, 11:54 PM
does anyone have a drawing for the diamentions and placement for the boarding step i am converting a22 20 with a left side door i have the material to build them thanks rocket 204

JoeB
07-07-2010, 10:37 AM
Funny, just repaired and painted my step yesterday.
(Got to break in my new Meco Midget, that's a nice little torch)
The info is probably on the SWP cd but it would be easier for me to measure my step and bracket on the airplane than to find it on the cd. I could easily do this tonight if you'd like?

EDIT: added the step photo off the plans

rocket 204
07-07-2010, 06:54 PM
that would be great thanks rocket

JoeB
07-07-2010, 07:18 PM
I hope this is the info you were looking for, measurements are taken off of the left side of a 1950 PA20

SuperPacer
07-08-2010, 12:44 PM
Just to add to options, if you haven't removed the orginal rear Tri-Pacer landing gear lugs, there is a "Step" that works really well in that location, as it is a little further to the rear of the ship, and makes entry/exit a bit more coordinated. If there is any interest, I'll post a photo or two.

enjoy the day,

john

rocket 204
07-09-2010, 09:07 PM
the rear 22 gear mounts were removed so i will build the regular step thanks guys rocket

captbill1956
07-09-2010, 10:03 PM
Just to add to options, if you haven't removed the orginal rear Tri-Pacer landing gear lugs, there is a "Step" that works really well in that location, as it is a little further to the rear of the ship, and makes entry/exit a bit more coordinated. If there is any interest, I'll post a photo or two.

enjoy the day,

john

I would like to see pictures of your step.
Thanks
Bill Meredith
N7749D
Kingsland, TX