1 Attachment(s)
Glueing On Inspection Rings After The Fact
Had to add some inspection rings in a covered wing to access some stuff. Glued the ring on the outside with Stewart's glue. After it dried I cut the hole out and then glued another ring on the inside but not good way to clamp everything.
Attachment 13558
Sent from my Pixel 2 XL using ShortWingPipers.Org mobile app
2 Attachment(s)
Re: Glueing On Inspection Rings After The Fact
Quote:
Originally Posted by
Steve Pierce
Had to add some inspection rings in a covered wing to access some stuff. Glued the ring on the outside with Stewart's glue. After it dried I cut the hole out and then glued another ring on the inside but not good way to clamp everything.
Attachment 13558
Sent from my Pixel 2 XL using
ShortWingPipers.Org mobile app
So I figured out a better way. Adapt and overcome. [emoji6]
Attachment 13559Attachment 13560
Sent from my Pixel 2 XL using ShortWingPipers.Org mobile app
Re: Glueing On Inspection Rings After The Fact
Quote:
Originally Posted by
Steve Pierce
As long as you didn't steel those from Cathy you are good! :lol:
Re: Glueing On Inspection Rings After The Fact
Quote:
Originally Posted by
Jim Hann
As long as you didn't steel those from Cathy you are good! :lol:
One of the cheapest tools you can buy actually.
Re: Glueing On Inspection Rings After The Fact
Quote:
Originally Posted by
Steve Pierce
One of the cheapest tools you can buy actually.
I know, I bought a pile years ago that is slowly dwindling as I modify them for different jobs!
1 Attachment(s)
Re: Glueing On Inspection Rings After The Fact
Unless you have a rib in the way I use these from Harbor Freight
Re: Glueing On Inspection Rings After The Fact
Quote:
Originally Posted by
Gilbert Pierce
Unless you have a rib in the way I use these from Harbor Freight
May I suggest the smallest squeeze bar clamps from Harbor freight. Super cheap and Super Handy.
Sent from my SM-G935T using Tapatalk