How much are you selling these for?
Printable View
Bender
Normally $50 for a pair but $40 for anyone here. The pic below is just an example of a variant or two. Can be custom made to most any thing/color/image/logo one might want or need. The bottom one is an insert that is in an original emblem casting. You just have to remove the "embossed Piper" inside the casting........ the one on the yoke is the insert with the corroded casting cleaned up and painted black. The 3 above would replace the casting itself but the cavity under the emblem needs to be filled with a light weight filler and smoothed out level for the adhesive to stick.
Attachment 15105
Attachment 15106
Hmmmmm, what does "invalid attachment" mean? ………..SJ, WTF? I'll try sticking them in here again...……
Attachment 15112Attachment 15113
Dang Southern Aero those are sharp looking!
We have a set of the pot metal control wheel emblems and also a set of early sheet metal emblems. The pot metal emblems are being restored by brazing on new pins, rechroming and repainting them. The sheet metal emblems are in very good condition. Either could come with a set of fresh powder coated wheels. Not for sale but we would consider trading either set for a pair of 1955 TriPacer cowl emblems in serviceable condition.
N2709P