Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
10-12-2017, 12:46 PM
#641
Re: Andy's Pacer restoration thread...
Originally Posted by
Brian
Brian
What would cause the Left Main to weigh 21 Lbs more than the Right?
Battery being on Right side should make the Right side heavier I would think.
Landing light, associated wiring on that side... Oil cooler is on the left baffle also... ELT left side of baggage hat rack... Svenns's light weight battery also...
Brian
-
10-12-2017, 03:59 PM
#642
Re: Andy's Pacer restoration thread...
Don't ask me how this happened on our PA-20 Pacer after all the Mods,. First time for me, but both mains were the same @516# ( never again) and the tail wheel at 75# for a total of 1107# Yes lighter than when we started.
-
10-12-2017, 06:22 PM
#643
Administrator
Re: Andy's Pacer restoration thread...
Originally Posted by
Steve Pierce
1321 pounds
For some reason I looked at a weight and balance on a Pacer with 36 gallons of gas. Thought that seemed kinda fat.
-
10-12-2017, 08:17 PM
#644
Re: Andy's Pacer restoration thread...
Right leg heavier than the left seems to be the norm Both of my Short Wings are heavier on the left side.
I weighed the Clipper when I first got it. Weighed it after the engine upgrades and again after the total restoration. Always heavier on the left.
-
10-14-2017, 11:54 AM
#645
Re: Andy's Pacer restoration thread...
The Pacer is pretty much done and ready to fly... Friday was spent getting the controls adjusted for feel and correct travel... Paperwork has also being worked on... 337 for all STC's and repair completed... Andy is here and ready to go for flight early next week...
As for the weights... I have several other Pacer W&B forms saved and all of them are heavier on the left gear... Just a Piper thing...
Brian
Sent from my iPhone using Tapatalk
-
10-14-2017, 07:01 PM
#646
Re: Andy's Pacer restoration thread...
Ok, I give and will ask the question. Why the PA-20 data plate over the PA-22 plate?
-
10-14-2017, 07:05 PM
#647
Administrator
Re: Andy's Pacer restoration thread...
I wondered the same thing.
-
10-14-2017, 07:13 PM
#648
Re: Andy's Pacer restoration thread...
Because it's both.... technically.
-
10-14-2017, 09:12 PM
#649
Re: Andy's Pacer restoration thread...
My opinion, I think the guys that rebuilt in 1985 probably got that newer tag and did it wrong. IMHO
"Progress is our most important problem"
-
10-14-2017, 10:01 PM
#650
Re: Andy's Pacer restoration thread...
So technically your calling it a PA-20 with a PA-22 serial number. So AD compliance would be fun to do. My FSDO wanted me to do the same thing to my conversion and re register it as a PA-20. I told my inspector to do an AD search and conformity inspection to the type certificate. He dropped the idea since you could not
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules