Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
Re: Platinum Pacer Wings
Originally Posted by
pistoncan
I have an impact scene driver th a you can tap with a hammer. Worked good on small screws as the impact keeps the bit in the screw.
I have that tool...the difficulty is when trying to install the #4 sheet metal screws into predrilled new spars...the Dakota cub screws strip out at the Phillips....thing...even when using a brand new #1 bit....or the screw snaps off. Even the cad plated steel screws from ACS snap/break...no where near tight..
Sent from my iPad using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules