Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
Mystery cable
I have this cable that's 20" long, I can't find it anywhere in the parts CD and don't know where it's supposed to go. Anyone have ideas? It's not the safety cables on the gear as those are installed and shorter. IMG_2186.jpg
-
Re: Mystery cable
-
Re: Mystery cable
Originally Posted by
AKJurnee
I have this cable that's 20" long, I can't find it anywhere in the parts CD and don't know where it's supposed to go. Anyone have ideas? It's not the safety cables on the gear as those are installed and shorter.
Pretty sure thats the brake cable for the old style bar type. from the break cylinder mounted inside the firewall. The rust in the centre kinda gives it away. As water always leaked on from the cowling and dripped on the cable causing ti to finally rust little just where it entered the firewall.
Jared
Last edited by piperrocks2013; 01-23-2017 at 07:00 PM.
-
Re: Mystery cable
Originally Posted by
piperrocks2013
Pretty sure thats the brake cable for the old style bar type. from the break cylinder mounted inside the firewall. The rust in the centre kinda gives it away. As water always leaked on from the cowling and dripped on the cable causing ti to finally rust little just where it entered the firewall.
Jared
Right but I have a Clipper, with hydraulic brakes. But thanks! Maybe something for the interior?
PacerGuy, I checked the Ski Drawings and it doesn't list cables in that lenghth, but the Float drawing has once cable close to 20" but this plane as far as I know was never on floats.
-
Re: Mystery cable
whoops sorry about that. Really thought I had the answer
Originally Posted by
AKJurnee
Right but I have a Clipper, with hydraulic brakes. But thanks! Maybe something for the interior?
PacerGuy, I checked the Ski Drawings and it doesn't list cables in that lenghth, but the Float drawing has once cable close to 20" but this plane as far as I know was never on floats.
-
Re: Mystery cable
Its the ground loop, whatever you do.. Dont hook it together!!
Last edited by Tp109; 01-23-2017 at 08:36 PM.
-
Administrator
Re: Mystery cable
Something someone made themselves. Not an original Piper cable since it doesn't have the single swedge. Never seen a cable like that installed in a Clipper.
-
Re: Mystery cable
Originally Posted by
Tp109
Its the ground loop, whatever you do.. Dont hook it together!!
HAHA! Good one!
Thanks Steve Pierce, I was going OCD on this.
-
Re: Mystery cable
Originally Posted by
AKJurnee
I have this cable that's 20" long, I can't find it anywhere in the parts CD and don't know where it's supposed to go.
IMG_2186.jpg
Well, now you know where it's supposed to go: In the junk drawer.
GG
Glen Geller
1955 PA22-150 "One For Papa!"
-
Re: Mystery cable
Just a guess but could it be one of the elevator - trim interconnect cable?
Chuck
1959 PA22/20
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules