Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
EDO float rigging
Looking for EDO 89-2000 float rigging for PA 22/20.
-
Bill Nyman
Re: EDO float rigging
Kenmore Air in Seattle has all the schematics for the 2000 floats..
-
Re: EDO float rigging
Thanks Bill, I've been in touch with them. The SWPC CD has some of them too. I have the floats, hoping to find used rigging in good shape. I see from your picture you have the stabilizer end plate fins. The early drawings show the ventral fin. I imagine the end plates are better.
-
Bill Nyman
Re: EDO float rigging
Give Eddie Peck a call..He is in Bear River Nova Scotia..902-467-3333..He could help you out with
whatever you need.
-
Re: EDO float rigging
-
Bill Nyman
Re: EDO float rigging
I have a set of complete rigging from Peck Aero on my tri pacer..
and they are exactly the same material and size that you would get from Edo..I also have the front weld on fittings and the bolt on fittings for the rear..you would never know the difference from the Edo gear.
His fittings are for experimental aircraft or owner maintenance aircraft..can you sign them out yourself or do you have an A and P mechanic who would..Talk to him and he might have tags for an aircraft that is certified..hope this helps you.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules