Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
Wing Rotator questions
I am watching the Stewarts video on covering a piper wing and they have the wing rotator hooked up to the wing tip. Can some one send some pictures of how the wing rotator hooks up to the wing tip?
Theo
-
Re: Wing Rotator questions
Originally Posted by
Theo
I am watching the Stewarts video on covering a piper wing and they have the wing rotator hooked up to the wing tip. Can some one send some pictures of how the wing rotator hooks up to the wing tip?
Theo
If you have Stewart wing tips you just stick the pipe in the hole for the nav light, won't work on stock tips.
IMG_0962.jpg
|
1957 PA-22/20 "Super Pacer" based 1H0
Lifetime EAA member
Vintage Aircraft Association member
Lifetime EAA Chapter 32 member |
-
Re: Wing Rotator questions
Ahah...question answered
Thanks
-
Re: Wing Rotator questions
I have seen a rod used through the hole the wires are fed through in the stock tips. I think it was just a steel welding rod (stick). It must be kept short or it will bend.
-
Re: Wing Rotator questions
FWIW, With the original tips there were a hole in the bracket at the end of each spar with which to attach the rotator, as I remember.
-
Re: Wing Rotator questions
Just to clarify, the rotator I saw used a hole through the wood bow.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules