Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
-
Fuel fittings
I am starting to reassemble the fuel system on my Vagabond.
I have the gascolator mounted on the firewall and in the cabin I have an elbow fitting that screws into the gascolator.
The elbow fitting needs to point straight up so I can connect the flexible hose to go to the tank.
Only problem is the elbow fitting only goes tight when pointing 90 degrees CW off vertical.
How can I overcome this?
I do have the recommended Loctite thread sealant but don't believe this is adequate without the fitting being tight.
TonyN
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules