Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: 4' of both front and rear wing spar needed for a 1960 PA-22-150

  1. #1
    rmwalkersr's Avatar
    Join Date
    Oct 2015
    Location
    Kansas City, KS and Storm Lake, IA
    Posts
    50
    Post Thanks / Like

    Default 4' of both front and rear wing spar needed for a 1960 PA-22-150

    Am adding the Stewart's wing tips and need to extend both spars on both sides. If you have a damaged wing, and want to sell sections of the spars, please drop me a line. Thank you!

  2. #2

    Join Date
    Jan 2010
    Location
    southeast arkansas
    Posts
    2
    Post Thanks / Like

    Default Re: 4' of both front and rear wing spar needed for a 1960 PA-22-150

    I sent you a pm

  3. #3

    Join Date
    Dec 2015
    Location
    Laporte TX
    Posts
    12
    Post Thanks / Like

    Default Re: 4' of both front and rear wing spar needed for a 1960 PA-22-150

    Quote Originally Posted by rmwalkersr View Post
    Am adding the Stewart's wing tips and need to extend both spars on both sides. If you have a damaged wing, and want to sell sections of the spars, please drop me a line. Thank you!
    Ihave both spars from my rebuild , they are bent at the strut fittings but the rest is very useable. Call me at 832 704 0025
    I'll give them to you.

    Sent from my SM-G935T using Tapatalk

  4. #4

    Join Date
    Jan 2010
    Location
    southeast arkansas
    Posts
    2
    Post Thanks / Like

    Default Re: 4' of both front and rear wing spar needed for a 1960 PA-22-150

    I,ve got a couple cut 55 inches or so.pm me your address or give me a call and I will get them on ups tomorrow.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •