Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
4' of both front and rear wing spar needed for a 1960 PA-22-150
Am adding the Stewart's wing tips and need to extend both spars on both sides. If you have a damaged wing, and want to sell sections of the spars, please drop me a line. Thank you!
-
Re: 4' of both front and rear wing spar needed for a 1960 PA-22-150
-
Re: 4' of both front and rear wing spar needed for a 1960 PA-22-150
Originally Posted by
rmwalkersr
Am adding the Stewart's wing tips and need to extend both spars on both sides. If you have a damaged wing, and want to sell sections of the spars, please drop me a line. Thank you!
Ihave both spars from my rebuild , they are bent at the strut fittings but the rest is very useable. Call me at 832 704 0025
I'll give them to you.
Sent from my SM-G935T using Tapatalk
-
Re: 4' of both front and rear wing spar needed for a 1960 PA-22-150
I,ve got a couple cut 55 inches or so.pm me your address or give me a call and I will get them on ups tomorrow.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules