Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
Re: Sliding window replacement
I tried to put a set of LP side windows in a PA18. They fit so bad I think I ended up making new ones myself.
i took my old Clipper windows tp a glass shop. They made new ones very inexpensively and they fit.
-
Re: Sliding window replacement
Just coming from experience. Call them with you dimensions and check. Pacers didn't come with sliding right windows that I have ever seen and all the doors were custom to each frame.
Makes sense. Thanks for the info, Steve! I'll do some investigating.
-
Re: Sliding window replacement
Can you legally put sliding windows in a 54 PA 20/22 if they don’t have them?
Sent from my iPhone using ShortWingPipers.Org
-
Administrator
Re: Sliding window replacement
If you look at the definition of major and minor I think you will find it to be minor. I think it would be challenging to do on a covered fuselage. I have converted J3 and PA11 fuselages to the dual horizontal sliding windows like the Clipper, early Pacer and Super Cub instead of the single vertical up and down slider they came with that you lock with a thumb screw.
-
Re: Sliding window replacement
I have an early PA-22 (serial 347) that has sliding windows on both sides. I have logs to day 1 and see nothing about them being added. I assume that they are factory.
Paul
Salome, AZ
-
Administrator
Re: Sliding window replacement
From looking at the fuselage drawings and the parts manual it looks like Piper went from the sliding window in 1952 on the Pacer and Tri-Pacer to the pop out front window in 1953. Looking at drawings 13462, 13928, 13049 and 13808.
-
Re: Sliding window replacement
Have a 53 with sliding windows on the left side
-
Administrator
Re: Sliding window replacement
Originally Posted by
robertsailor
Have a 53 with sliding windows on the left side
The Pacer parts manual doesn't break down by serial number just year model. Wonder if yours was an early 53 and it was done at the factory before they changed over or someone changed it later.
-
Re: Sliding window replacement
Update on this thread for anyone interested:
I'm planning to work with LP Aero Plastics (http://www.lpaero.com/) to get new windows cut. I could probably work with a local company, but LP already knows what I'm talking about and does this daily. I believe it'll be around $50/window.
Thanks for all the tips in this thread.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules