Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: New Bushmaster Project

  1. #21

    Join Date
    Jan 2019
    Location
    Chico, CA
    Posts
    26
    Post Thanks / Like
    Blog Entries
    1

    Default Re: New Bushmaster Project

    I still needed to put a smart level on the rectangular aluminum to ensure parallelism. I set the forward attachments first, then pulled down the high side. It worked out real well.

  2. #22

    Join Date
    Jan 2019
    Location
    Chico, CA
    Posts
    26
    Post Thanks / Like
    Blog Entries
    1

    Default Re: New Bushmaster Project

    I set it at 21.5" pitch.

  3. #23

    Join Date
    Jan 2019
    Location
    Chico, CA
    Posts
    26
    Post Thanks / Like
    Blog Entries
    1

    Default Re: New Bushmaster Project

    Quote Originally Posted by chicobushmaster View Post
    I set it at 21.5" pitch.
    The round sections of the fixture are 1" diameter that I put in a lathe, faced the ends, drilled, and taped. This establishes perpendicularity on the ends, and concentricty with the diameters.

  4. #24
    Stephen's Avatar
    Join Date
    Nov 2007
    Location
    Lopez Island, WA
    Posts
    3,150
    Post Thanks / Like

    Default Re: New Bushmaster Project

    Quote Originally Posted by chicobushmaster View Post
    The round sections of the fixture are 1" diameter that I put in a lathe, faced the ends, drilled, and taped. This establishes perpendicularity on the ends, and concentricty with the diameters.
    What is the 21.5" pitch?

    It looks like you have squared the brackets and have no toe angle. ??
    "You can only tie the record for flying low."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •