Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 9 of 9

Thread: Shoulder Harness Clamps

  1. #1

    Join Date
    Oct 2018
    Posts
    20
    Post Thanks / Like

    Default Shoulder Harness Clamps

    Afternoon, anyone have a pn/source for clamps to go around the tube to put shoulder harness in the Colt? Thanks!

  2. #2

    Join Date
    Nov 2018
    Location
    Centennial Colorado
    Posts
    26
    Post Thanks / Like

    Default Re: Shoulder Harness Clamps

    I believe Univair sells the 1” clamp

  3. #3
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    11,528
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Shoulder Harness Clamps

    Univair and Wicks sell these structural clamps in different sizes.
    https://www.univair.com/search.php?s...+Clamp&Search=
    ms27405-12P__68907.1494512848.1280.1280.jpg

  4. #4
    smcnutt's Avatar
    Join Date
    Dec 2007
    Location
    Indianapolis, IN
    Posts
    1,266
    Post Thanks / Like

    Default Re: Shoulder Harness Clamps

    Quote Originally Posted by Steve Pierce View Post
    Univair and Wicks sell these structural clamps in different sizes.
    https://www.univair.com/search.php?s...+Clamp&Search=
    ms27405-12P__68907.1494512848.1280.1280.jpg
    Not sure how you could slip one of those clamps over the tube and then get it to close again all while reaching up thru the headliner. I liked the two-piece type clamps vs prying one open and closed again. Not sure what is the correct size but this is the style.

    https://www.univair.com/search.php?s...arness&Search=
    3232-1__62872.1468620511.1280.1280.jpg

    Sent from my SM-T350 using ShortWingPipers.Org mobile app
    “Common sense is in spite of, not the result of, education.”
    ― Victor Hugo

  5. #5

    Join Date
    Jun 2012
    Location
    Richmond, Texas
    Posts
    976
    Post Thanks / Like

    Default Re: Shoulder Harness Clamps

    The ones I put in the Pacer came from Wag-Aero and they are PMA. Looks like they also have a two piece one. I used the one piece since the head liner was already lose due to installing a skylight.
    If this goes to page 1 the clamps are on page 5
    https://www.wagaero.com/catalogsearc...Harness+Clamps+

  6. #6

    Join Date
    Oct 2018
    Posts
    20
    Post Thanks / Like

    Default Re: Shoulder Harness Clamps

    https://www.gen-aircraft-hardware.co...df/ms27405.pdf Looks like the MS27405-T8P is the ticket, anyone know where to get them? Thanks

  7. #7

    Join Date
    Oct 2018
    Posts
    20
    Post Thanks / Like

    Default Re: Shoulder Harness Clamps

    To rich for my blood, MS27405-T8P would work nicely and should be inexpensive!

  8. #8
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    11,528
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Shoulder Harness Clamps

    The clamps open pretty easy. Still think it is easier to loop the harness around the spar carry through and seems to me that it spreads to load out over a wider area.

  9. #9

    Join Date
    Oct 2018
    Posts
    20
    Post Thanks / Like

    Default Re: Shoulder Harness Clamps

    Agreed, that is the simplest solution, cowl tape on the tube to protect the harness?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •