Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Found a shop that will acid etch the attached PIPER logo on a 3" W 3" H .025" aluminum plate.
The original quote was for 20 pieces using the artwork that I supplied. Due to the small quantity that would be $41.47 each, etched, polished and clear coat.
I imagine that if a larger quantity is needed it would drive the unit cost down.
Anybody interested?
Last edited by Vagabondblues; 05-06-2021 at 08:41 PM.
This is perhaps not exact: the early models (pre 1955) have the plate as shown in the pic above. Models 55 and up
had the Flat plate with piper CF1856B6-4BE2-4ECE-ABEB-E646647D03BF.jpeg