Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
I have been very busy with work, racing, and other stuff. I have the left wing just about done, I just need to apply the finishing tapes and inspection ring doilies. They messed up my Poly Fiber order and sent some untinted Poly Brush, that's why the fabric is not pink. No difference in the product, or its usage. I made a complete set of control cables, except for the aileron cable that attaches to the yoke pulleys, as I don't want to buy the tools to make the crimped on ball. they look to be in good shape. As soon as this wing is done, I will swap it for the right wing and get that one done. Then I can start on the fabric on the fuselage while the paint shop gets the wings and all the new sheetmetal parts painted. Definitely feel like I am over the hump on the project!
You can get Poly-Fiber to send you the pink tinting to add to clear Polybrush. I used the clear on my Super Cub fuselage in the baggage area because I didn't install a headliner and didn't want to see the pink. Was a.littlr harder to tell where I had brushed.
I believe there are two at the wing root to get to the flap bell crank and aileron attachment and one where to strut attachment bolts are. I also think there is a Piper drawing showing the factory inspection cover locations.