Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: I'm Sure This isn't Stock.

  1. #1
    Clayton Harper's Avatar
    Join Date
    Dec 2007
    Location
    Seabrook, TX
    Posts
    1,346
    Post Thanks / Like

    Default I'm Sure This isn't Stock.

    Has anyone seen something like this?
    Attached Images Attached Images

  2. #2
    Clayton Harper's Avatar
    Join Date
    Dec 2007
    Location
    Seabrook, TX
    Posts
    1,346
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    This is what I need, I think.
    Attached Images Attached Images

  3. #3
    DougG's Avatar
    Join Date
    Jan 2008
    Location
    Strathclair Mb Canada
    Posts
    161
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    I'm pretty sure the first pictures could be found in a Van's catalogue.
    DougG

  4. #4
    Clayton Harper's Avatar
    Join Date
    Dec 2007
    Location
    Seabrook, TX
    Posts
    1,346
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    DougG,
    Thanks, that explains a lot. I guess I'm looking for a P/N 12316 then. Does anyone have one?

  5. #5

    Join Date
    Jan 2010
    Location
    Venice, Fl
    Posts
    26
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    Got one from Univair about a year ago, it was around $80.

    Dave

  6. #6
    Pacerfgoe's Avatar
    Join Date
    Nov 2009
    Location
    Salmon Arm BC
    Posts
    910
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    I saw one on Ebay not too long ago....a month maybe

  7. #7
    andya's Avatar
    Join Date
    Dec 2007
    Location
    UT47
    Posts
    1,995
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    have welded one up quite a few years back....
    Get out the TIG Clayton..It's just a clamp to hold it to the engine mount
    with an extended tube to the part that holds the mixture cable
    "Progress is our most important problem"

  8. #8
    Clayton Harper's Avatar
    Join Date
    Dec 2007
    Location
    Seabrook, TX
    Posts
    1,346
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    NJ Dave, Pacerfgoe, andya,
    Thanks for your help. I liked the $20 on eBay better than the Univair $85 one. eBay one is gone. Maybe one will turn up, before I have to pay the $85 price, or weld one up.
    Last edited by Clayton Harper; 06-25-2016 at 03:50 PM.

  9. #9
    andya's Avatar
    Join Date
    Dec 2007
    Location
    UT47
    Posts
    1,995
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    there seems to be enough Tripacers being parted out by a couple outfits in the PHX area, might
    just look on ebay for PA-22 or PA-20 or Pacer and see whats available. When you don't find
    what your looking for, send a message to see if they have one.

    Do same on Barnstormers, I know there's a guy that has tripacer parts in the PHX area as well.

    they may not be advertising the clamp you need but they may have it in the pile of stuff
    they are picking from

    andy
    "Progress is our most important problem"

  10. #10
    pistoncan's Avatar
    Join Date
    Dec 2007
    Location
    Vienna Mo
    Posts
    653
    Post Thanks / Like

    Default Re: I'm Sure This isn't Stock.

    Quote Originally Posted by Clayton Harper View Post
    NJ Dave, Pacerfgoe, andya,
    Thanks for your help. I liked the $20 on eBay better than the Univair $85 one. eBay one is gone. Maybe one will turn up, before I have to pay the $85 price, or weld one up.
    I had one Clayton, but I gave it to Mark up in Alaska, as he needed one. I would be interested in your non stock as I now have a lycoming. Gary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •