Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
Spinner back plate
At Annual today my IA notice that the prop-bolts had started to warp the spinner back plate and said I should start looking for a replacement. If anyone has one gathering dust I'd definitely be interested in it.
Rest of the spinner is in good shape.
Thanks,
Grant
-
Unfortunately this is TOO common on many Piper spinners.
I have used washers with a larger Outside Diameter & it reduces the "dimpling" at the prop bolt holes.
My thought is has no effect on balance & a Minor Alteration-log entry only.
-
Administrator
Piper used a special larger area washer. Here is a thread about it. I will have to put the pictures back in it since the move to the new software. http://www.shortwingpipers.org/forum...ght=prop+bolts
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules