Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
-
Steve's Aircraft single puck wheel and brake STC now available for PA-22
Finally... After more than 6 months got the approval....
STC SA02569SE is approved for all PA-22 series to install Cleveland kit No. 199-04600. This kit is used on Cessna 140 through 182 and is readily available through Chief Aircraft and Univair for just under $1700.00. A 1/4 inch spacer must be fabricated and installed for these wheels to work on the Piper axle and a drawing is included with the STC.
These are single puck type disk brakes that work well on the Tri-Pacer and also converted Pacers.
This is a paperwork only STC.
Priced at $250.00
A $75 discount will be given to any Tri-Pacer owner that orders one of our STC vented master cylinders at the same time.
Brian.
Last edited by Steve Pierce; 10-24-2017 at 08:50 AM.
-
Administrator
Re: Steve's Aircraft single puck wheel and brake STC now available for PA-22
Great news Brian. Congrats and thanks for the effort, these airplanes will all be better for it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Likes: 
Reply With Quote