Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Page 1 of 7 123 ... LastLast
Results 1 to 10 of 67

Thread: Piper Emblem On the Control Yoke

  1. #1

    Join Date
    Aug 2011
    Location
    Conneticut
    Posts
    21
    Post Thanks / Like

    Default Piper Emblem On the Control Yoke

    Where would a Piper owner find the "PIPER" emblem that's on the control yoke? Seems to be hard to find if not impossible!

  2. #2
    Nathan Hiebert's Avatar
    Join Date
    Jan 2011
    Location
    Hesston, KS
    Posts
    246
    Post Thanks / Like

    Default

    A good friend of mine is getting ready to build some cast aluminum emblems. If you can't find them anywhere else, let me know and I'll let you know when they are ready.

  3. #3
    Twofieros's Avatar
    Join Date
    Jan 2011
    Location
    Charleston, WV
    Posts
    302
    Post Thanks / Like

    Default

    Nate,

    I might be interested in a set also.

    Tim

  4. #4
    Nathan Hiebert's Avatar
    Join Date
    Jan 2011
    Location
    Hesston, KS
    Posts
    246
    Post Thanks / Like

    Default

    phip007, I tried to reply back to your message with a photo, but couldn't figure out how to attach the photo so I'll just put it here. These are pictures of the original R/H emblem on my plane that I rebuilt. Re-painting them can be done, but it is VERY tedious! I think it turned out alright though.

    Tim, I'll let you know when we've got the new ones built.

    DSCN0884.jpg

    DSCN0881.jpg

  5. #5

    Join Date
    Feb 2011
    Posts
    18
    Post Thanks / Like

    Default

    What are they worth? I have a pair.

  6. #6
    Avalancheman's Avatar
    Join Date
    Nov 2010
    Location
    Tetonia, Idaho
    Posts
    41
    Post Thanks / Like

    Default

    Nate - Hey I am looking for two emblems also. How much are you selling them for?

    Layne

  7. #7

    Join Date
    Aug 2011
    Location
    Conneticut
    Posts
    21
    Post Thanks / Like

    Default

    54pacer,
    the emblems you posted look good. I'm going try to get a quote from Moody Aero Graphics to fabricate these emblems. Now will they also paint around the PIPER lettering?

  8. #8

    Join Date
    Jun 2011
    Location
    Evergreen,AL
    Posts
    2
    Post Thanks / Like

    Default

    I also am looking for one, as I have one already. Are the emblems the same as original with the pins on the back side to mount in the holes in the yoke? Also, how much for them? Thanks in advance for your help!
    Sam

  9. #9
    Frank Green's Avatar
    Join Date
    Dec 2007
    Location
    Frankfort NY
    Posts
    839
    Post Thanks / Like

    Default

    I think most are missing because the pins on the back broke off. I was missing one pin anyway so i cut the rest off and replaced with 6-32 flat head screws and lock nuts. Filed the screw flush with the nut and touched up the screws with paint to hide them. Yea painting the emblems is a chore.
    -Super Stub-

  10. #10

    Join Date
    Nov 2011
    Location
    WA
    Posts
    3
    Post Thanks / Like

    Default

    Hey everyone, any results on this? I would love to buy a set for the boyfriend for Christmas

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •