Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Lubricating Control Pulleys

  1. #1
    pa20's Avatar
    Join Date
    Jul 2008
    Jackson-Westover Airport (KJAQ)
    Post Thanks / Like

    Default Lubricating Control Pulleys

    I searched the forum for this information, but did not see anything.
    What substance seems to be the best for lubing the control pulleys. Not just from the aspect of not attracting dirt, but that will not contaminate the fabric? As care as one tries to be, it is invariable that some will drip onto the fabric, and I don't want to set myself up for problems with a repair down the road.
    I have always used LPS-1 as it dries so as to not attract dirt.
    Thanks! Sorry for such an elementary question.
    Mark Ohlau
    PA-20 N7744K 2017 Donation Paid

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Graham, Texas, United States
    Post Thanks / Like
    Blog Entries

    Default Re: Lubricating Control Pulleys

    I use LPS2 inside and LPS1 outside. The 1 doesn't streak like the 2.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts