Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
battery minder install
Anyone have any tips on the best way to install the battery minder leads semi-permanently? The battery minder leads have two ring terminals that connect to the battery terminals, then a short wire and plug to connect/disconnect the charger easily. After looking at the battery box, there is essentially no way to run the cord out of the box as everything is sealed or vented to the outside. I know I can just hook it up when in the hangar with alligator clips but it's a bit of a pain to remove/reinstall the seat and the battery box lid every time. Just wondering if anyone had any tips on what they have done.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules