Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
10-09-2018, 10:35 AM
#131
Re: Steve's Rudder Trim
Originally Posted by
Jim Hann
Forgot to call, do you have the kits ready? Do you want payment now or when they are ready?
Jim
PS, I知 surprised only two of us wanted this!
Sent from my iPhone using Tapatalk
|
1957 PA-22/20 "Super Pacer" based 1H0
Lifetime EAA member
Vintage Aircraft Association member
Lifetime EAA Chapter 32 member |
-
10-09-2018, 10:46 AM
#132
Re: Steve's Rudder Trim
Originally Posted by
Jim Hann
Forgot to call, do you have the kits ready? Do you want payment now or when they are ready?
Jim
PS, I知 surprised only two of us wanted this!
Sent from my iPhone using Tapatalk
I would have kits ready, except I realized the gear's I have to drive the chain are not drilled for the roll pin necessary to lock it onto the control wheel... In fact, figured out that they were
drilled by the old machinist that passed away and the jig that was used is no longer available.. So, I am in the middle of designing a new jig to drill the gear... Have the material and a drawing, just
need a few hours with my friends end mill.
Ill let everyone here know when they are ready and you can call up at that time...
Thanks.
Brian.
-
10-09-2018, 04:54 PM
#133
Re: Steve's Rudder Trim
I値l take a kit
How do I pay for it
Sent from my iPhone using ShortWingPipers.Org
-
11-07-2018, 05:57 PM
#134
Re: Steve's Rudder Trim
UPDATE:
Have 2 kits ready to go finally... One kit will be ready as soon as I get a spring that has been back ordered on me...
I have the following users interested in order according to this thread..
Jim Hann
cozzmo81
pilot
tomcat1129
Let me know if you are still interested... Price staying at $475.00 ... I'll include shipping at that...
Brian.
-
11-07-2018, 06:00 PM
#135
Re: Steve's Rudder Trim
I知 still interested, I can call you with the card info.
Jim
Sent from my iPad using Tapatalk
|
1957 PA-22/20 "Super Pacer" based 1H0
Lifetime EAA member
Vintage Aircraft Association member
Lifetime EAA Chapter 32 member |
-
11-07-2018, 07:30 PM
#136
Re: Steve's Rudder Trim
I'll take one,
How do I purchase it? Do I go to the website?
Thanks,
William McClain
Originally Posted by
stevesaircraft(Bri)
UPDATE:
Have 2 kits ready to go finally... One kit will be ready as soon as I get a spring that has been back ordered on me...
I have the following users interested in order according to this thread..
Jim Hann
cozzmo81
pilot
tomcat1129
Let me know if you are still interested... Price staying at $475.00 ... I'll include shipping at that...
Brian.
-
11-07-2018, 07:42 PM
#137
Re: Steve's Rudder Trim
-
11-08-2018, 10:18 AM
#138
Re: Steve's Rudder Trim
It痴 still on my list, but I致e had some other stuff come up so I値l have to wait.
Sent from my iPhone using ShortWingPipers.Org
-
11-08-2018, 02:07 PM
#139
Re: Steve's Rudder Trim
Best way to order is to call me direct..
541-826-9729
Thanks.
Brian
-
11-10-2018, 11:06 AM
#140
Re: Steve's Rudder Trim
Won't be long and I'll be looking for a cross-country destination on a day with a good crosswind
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules