Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
Pa 22/20 elevator bungee attach point
Hi all,
im finishing up on a pa22-20 restoration. Got to the elevator installation, specifically the lower bungee attach point. It's not clear in the univair manual I have where the offset Brackett attaches. The previous owner appeared to have attached it to the lower elevator horn with the stop using the an23-10 bolt. Another pacer I've looked at attached it to the stop bracket with the lower elevator cable turnbuckle. The manual just shows a picture of it, where the top attaches to the horn, but not the bottom. Any thoughts,?
thanks,
ross
-
Re: Pa 22/20 elevator bungee attach point
I just looked at this yesterday....If you have the Drawings CD it's on page 4 of the PA-22 section (Starting SER#2378 ) drawing # 11825
Last edited by Pacerfgoe; 05-06-2014 at 11:35 PM.
-
Re: Pa 22/20 elevator bungee attach point
Thanks for the response, but I don't have the cd.
ill order one .
cheers,
ross
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules