Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
Prebuy inspection near Barre VT
Does anyone have a good contact for a PA22/20 prebuy near Barre VT? Thanks
-
Re: Prebuy inspection near Barre VT
Best I could do is to loan you my A&P/IA, who has been helping me with 57A (PA-22-150) for the past 6 years so he's certainly becoming pretty familiar with at least one short-wing! I could ask him if he'd be interested, if you like.
His "shop" (hangar space) is in Post Mills, but I know he travels to a number of locations.
-
Re: Prebuy inspection near Barre VT
Originally Posted by
walt.buskey
Best I could do is to loan you my A&P/IA, who has been helping me with 57A (PA-22-150) for the past 6 years so he's certainly becoming pretty familiar with at least one short-wing! I could ask him if he'd be interested, if you like.
His "shop" (hangar space) is in Post Mills, but I know he travels to a number of locations.
Hey Good Morning,
Thanks for the reply. That might be a good start. The plane in question has been completely restored. My biggest focus on the inspection will be ensuring all the proper paper work is in place for the work that was done which was extensive and that the plane was rigged properly. If he's interested he can contact me - sheltonmaine@yahoo.com
Thanks,
Greg
-
Re: Prebuy inspection near Barre VT
I've forwarded your message to Andy.
-
Re: Prebuy inspection near Barre VT
I can recommend my IA at KMPV, but if it's the airplane I'm thinking of, he has worked on it. For better or for worse, the IA knows the plane well (and likes it a lot).
If you want to know more, feel free to PM me.
Rick
-
Re: Prebuy inspection near Barre VT
Originally Posted by
Rmac
I can recommend my IA at KMPV, but if it's the airplane I'm thinking of, he has worked on it. For better or for worse, the IA knows the plane well (and likes it a lot).
If you want to know more, feel free to PM me.
Rick
Thanks..... I spoke with him today.
Greg
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules