- Fuselage Repairs
- Varifocals
- ELT Antenna Installation
- Laying Tapes
- Trim or weatherstrip for PA-22 side window
- Dissimilar Metal Corrosion Ailerons and Flaps
- Tom T. Restoration returns from paint detail shop
- Kydex
- Lift strut door clips
- Tailwheels - solid or tube?
- Control cable sequence
- EGT question
- Oil Coolers
- Thank you Gilbert Pierce-Tailwheel
- Fairlead Cleaning
- Paint Stripper and Naval Jelly
- Fabric Questions - Help!
- Short Wings on Floats
- Finding cable tension using lateral pull force
- Propeller questions
- Sealing windows
- strutt cuffs
- Wing racks
- Repairing Original Piper Ribs
- Landing gear
- Bungee Fun
- wing strut inspection
- HEADLINER
- Adding a cigarette power outlet?
- Painting of Parts
- Blasting Fuselages, Any Volunteers?
- Reassemby
- tail fin fun
- Stuck Horiz. Stabilizer
- Interior Materials
- Building a New Clipper Cowl and Boot Cowl.
- wing racks
- windows
- NUTS AND BOLTS
- OIl Cooler on a Colt
- ENGINE GROUND
- Two Piece to One Piece Cam Shaft
- Tow bars
- Stewart Fabric System
- Changing a O-290 D to a O-320 Axx
- Seat Belt adjusters???
- Rib Stitching Detail Drawings.
- Windshield Installation
- plugging insp. holes for painting. Non-SWP
- W&B Form
- Weight and Balance (Part 2)
- Pipe thread to AN fitting adapter
- Wing assemble order queston
- Aluminum Brightener??
- PA-22 headliner
- Colt - no leg solutions?
- Upper wing strut fairing
- Headsets
- GoldenEagle Flight Prep and it's free
- Forming the Cooling Lip for the Bottom Cowl
- Scum
- HEMS Low Altitude Flight Tool
- new paint
- N-number stencils
- O-320's
- puting on wing fittings
- Colt rewiring
- univair dual brakes
- Door post trim
- Hey, I can't get my wheels off!
- Tail Brace Hardware
- Spar ADs
- amps
- Fuselage covering
- Feverish Clipper
- wiring
- removing #4 slot screws
- Airtex Interiors
- Aviation Humor (?)
- Original Pitot Tube Diameter
- drag and anti drag wire pulls
- lock nuts vs lock washers
- drag strut bolt torque
- Wing Spars
- Unique Parts
- Need help choosing correct firewall rivets
- floorboard sound deadening?
- headliner
- Meet your cousin
- Type "A" and "B" tapping screws
- Repainting an engine
- Strobe installation
- Fabric Iron?
- VOR Antennae Coax Cable Routing
- Vagabond upholstery
- Main Bearing/Dowel Pin Alignment
- CO level in cabin
- Occupational Hazards
- Rigging
- soda blasting
- Stripped exhaust stud on 0-320
- Replacing a headliner on a PA-22
- Weight and Balance Info Needed
- Ski Treatment
- RAPCO vs Cleveland rotors/ Brake disc
- no more mess on full cans
- Cleaning instrument glass (inside)
- New Wing Spars
- Tri Pacer front seat removal
- Oil Temperature Probe Blast Tubes.
- PA-22 Baffling
- wing attach bushings
- Tools
- Interior materials
- PA-22 IFR Certification - CDI Placement & Panel Layout
- Engine Update
- Interior Panel Installation
- Polishing the fabric
- Inspection Holes in the Fuselage.
- Bottom Cowl on a Pacer
- Vagabond Rudder Trim???
- Bench Seat Seatbelt Mounting Points
- fixed ballast???
- Dirty birds
- Engine model
- Intercom question
- Change Trim pulleys
- Intercom question again
- powder vs paint
- Randolph Ranthane
- Vagabond seat belts
- Found rear door panel source
- instument panel
- Removing nose gear chrome tube
- Using Stewart Paints with a roller
- Restoration Video
- Hardware cross-reference
- rejuvinating fabric
- Control Surfaces Repair
- Fuselage inspection after ground loop
- Skis?
- Aluminum specifications
- Calibrating the Kollsman Altimeter
- Spray equipment for Poly-Fiber
- Backseat installation
- Control yoke removal?
- Aileron/Flap prior to cover questions
- Winter pre-heat options
- Muffler shroud
- Glide Ratio
- Piper outside parking
- Stripping Aerothane?
- Wing Holder...thingy : D
- paint oxidation on old finish...
- Dealing with cracks in polytone
- PA-22 160 13 Rib - Drag Wire Tension?
- Trailering my PA22 home
- Stitching
- Cylinder paint
- Headliner before covering
- Tape Problem
- Weight & Balance
- Colt belly panel
- Metal parts fabrication
- # wires for headset/mic jacks?
- Vagabond Seat Lacing
- Nav light wiring
- Anyone use ratchet straps for tie downs?
- Recommended wire connection at rudder?
- Window sealent
- Dremel selection
- Vertical Fin Stitching - PA22
- Click-bond nutplates
- Elevator Turnbuckle Safety Wire
- Strut Fork Extension
- landing light lens seal
- 43-13--bolts & rivets
- No hole in headliner for trim maintenance
- PA22 Vent
- Leading edge aluminum forming
- Gas tank sloshing compound
- Lower Aileron Cable Exit
- What to do before hanging firewall?
- Nav Antenna
- Seat Reupholstering Tips?
- PA-16 engine instrument markings
- Vagabond rigging position
- Interior fabric
- What is this?
- How to remove
- Avionic installation glich???
- PA 22/20 Rear Seat Removal
- Registration Sticker Removal
- PA17 fuselage covering
- Marten Fabric Clips
- Normal Take Off
- Tri-Pacer iPad mount options?????
- Play in the elevator
- Pacer landing gear geometry
- PA-22 Firewall Install prep
- Cleaning Headliner
- Color Chart Stewart Systems
- Brushing/Rolling on Poly-Fiber Coatings
- Bent Gear Diagnosis
- Tube and fabric
- Front windshield collar
- Oil Temp/Pressure Gauge Plumbing
- 800x4 Wheel and Tire Balancing
- New Polyfiber Medium -4 Fabric
- The Fuel / Air Mixture
- Covering material list
- ASI static for a Vagabond
- Paint pictures
- PA17 Vagabond Rate of Climb
- PA20 Weight & Balance
- New sealed struts for a Vagabond
- Dual 2" Venturis?
- Lycoming O-320 Expansion Plug
- Panel Placards
- firewall blanket
- Pulley bracket and rib question
- Valcom 760 wiring
- Wing inspection panels
- Cutting plexiglass
- Vagabond leveling for weight & balancing
- Clipper Spinner Installation
- Found a crack in tail post
- cleaning aluminum fuel tanks
- Workshop extraction/ventilation system
- Fuelhawk Calibration
- transporting my first project
- Aileron cable exit covers/seals
- Paint quantity for spraying struts
- Reassamble
- wing root fairings... rubber trim?
- ODYSSEY Battery terminals
- stripping the fuselage: bead blasting, buffer, or chemical stripper?
- Marvel Mystery Oil
- Superflight "System 7"
- Filled primer coating on fuselage tubes
- PA22 Lift Strut Fork Fastening
- Aileron Limit Stops
- Pawnee tailwheel spring
- How to splice shielded wiring?
- Installing Magnetos
- Cold weather ops / oil cooler cover
- Naugahyde cable seals
- landing as short as possible
- How to check landing gear alignment?
- battery minder install