Used left wing parts for a pa-16 clipper

[clipquito]

All parts removed from my PA-16 Clipper on March 8, 2011. Most parts are original to this wing. All parts are as-is condition – most are in good shape. All need cleaning. Have priced all with Univair new. Asking $1200 plus shipping for all. This is less than half the total value (new).

The number in the ( ) indicates how many of each part.

Piper Brace Channels
12252-002 (3)
12252-003 (5)
12252-004 (2)
12252-006 (3)
12252-008 (2)

Ribs
11752 (1)
10634-002 (1)
12046-004 (5)
12046-007 (1)
12046-006 (1)
10742-002 (1)
11750-000 (1)
10635-000 (1)

Trailing Edge (fin) 11517-000

Pitot Tube and Bracket 83161-002

Brace Wires with Drag Wire Pulls 14941-007 (4)

Fuel Tank Parts
10641-000 (1)
10648-003 (2)
10649-003 (2)
10650-002 (2)

False SparConnections (Trailing Edge)
15562-002
15575-000
I have 5 total. Not sure which ones are inboard and which are outboard.

Leading Edge CoverOutboard (nearest wing tip bow) 13072-005

Aileron Brackets
41291-000 (inside pulley bracket brand new) (1)
14581-000 Horn plus hinge piece (1)
10912-006 (2)

Spar Connections
14182-000 (rear) (2)
14192-000 (front) (2)
14271-000 (filler block rear) (2)
14461-000 (filler block front) (2)

Drag Struts
14222-000 (2)
14232-002 (1)
15403-000 (1)

Spar Hinge fitting (front) 10401-000

Fin form (support plate) 10633-000

Various brackets

[clipquito]

Finally had a chance to really go over my wing parts. Found some minor bends and cracks in a few ribs. About 5 are in good condition as well as the leading edge ribs and false spars. All other parts are in good condition. The aileron horn (stop piece) is not available as originally listed. I needed to put it on my new aileron. Also, some minor surface rust is evident on the hinge piece where the horn attached. Pictures of everything available upon request.

Decided to lower the price after finding the bumbed ribs. Asking $700. Free shipping.