For a PA-16 Clipper. I cant seem to find it in the SWPC drawings. I am looking for the correct P/N screw/bolt that attaches the rudder cables to the rudder. It appears that what is currently installed is an AN23-xx clevis bolt with an AN310 castle nut and cotter pin. What do you all have there? AN23 clevis bolt, AN3 bolt, or something else? Lucas F
I am looking to have repairs and cover for a set of 53 Tripacer wings. One wing is about 2/3 rebuilt, the other has not been disassembled yet. I know I probably won't find a spot tomorrow but I need a path forward. Located in northern Utah but can bring them elsewhere. Utah and Nebraska are easy for me but I can travel. The mechanic said he won't have time to continue work on it. In the mean time I am looking for a set of wings to buy to get the plane in the air or a whole airplane ...
Good evening, I would like to get the fuel sending units from my fuel tanks rebuilt. Does anyone know a company that provides that service. I know I can time the burn etc -but would still like some accuracy of the fuel gauges. Any help would be appreciated, Thanks, Marsha
Looking for info..I have just finished squaring the wings of my PA22 floatplane and now installing fabric..my question is this..looking for anyone who has done this procedure have they got a weight increase via 337..for their aircraft if so would they be willing to share this with me. thanks
I had a cracked exhaust and it was very close to that . At idle and taxing no issues . On the climb out I could smell heat and saw light smoke . I thought it was the controller for my electronic ignition so I got a heat gun and would check the temp of the controller turns out the exhaust leak was on the other side of the firewall
Archive
Recent Comments