Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Likes Likes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: 0290parts

  1. #1

    Join Date
    Apr 2015
    Posts
    11
    Post Thanks / Like

    Default 0290parts

    I have recently purchased a large lot of parts from an engine overhaul shop that closed. I wound up with several new old stock item for the 0290g 0290d and 0290d2 motors. I have 2 new cases 4 new old stock cylinders about 150 new old stock o290 d2 pistons several of 290 piston rings intake tubes pushrod tubes push rods connecting rod cam followers gears I have 1 yellow tagged crank, just lots of stuff. I have several sets of cylinders that are used and overhauled also but only 1 new set. call with request. 407 509 4383 justin

  2. #2
    cgfyl's Avatar
    Join Date
    Jun 2010
    Location
    Leduc, Alberta Canada
    Posts
    322
    Post Thanks / Like

    Default Re: 0290parts

    Justin,

    Do you have any Cams?

  3. #3
    51-pa22's Avatar
    Join Date
    Sep 2008
    Location
    Waxahachie, Texas
    Posts
    505
    Post Thanks / Like

    Default Re: 0290parts

    What part number cam are you looking for?


    Just making notes here for future reference
    The 60366 Cam used with gear 65384 or 61162 gear to make 60768 cam shaft assembly
    or the 74792 Cam used with 61162 gear to make
    Or is it the 76094 one piece O290-D2 cam
    Vs 75706 one piece O290-D cam

    61527-->62772-->75706

    From Lycoming's IPC for O-290-D2 dated 1960
    Fig 3 pg 3
    Lists 67951,68769 ASSY with gear 61162

    From PC-103 April 1970 O-320-###
    Lists 68769 Camshaft Assembly with 68639 Gear


    Pulled a narrow lobe out of a 1954 O-320 (no suffix)
    and found a wide lobe on ebay same part number as O-290-D2 and O-320 (no suffix)
    image.jpg
    SI1218A lists 61162 gear for O235-C, O290-D, & O290-D2

    cgfyl pull up Si 1218A and
    get a copy of Superior Air parts "Lycoming Cam & Cam Follower Applications"
    You can get a copy from aircraft-specialties.com.
    Also a good copy from ACS
    Note the 1 digit part number difference between camshaft vs camshaft assembly.

    Last edited by 51-pa22; 04-07-2015 at 07:38 PM. Reason: Collecting data

  4. #4
    cgfyl's Avatar
    Join Date
    Jun 2010
    Location
    Leduc, Alberta Canada
    Posts
    322
    Post Thanks / Like

    Default Re: 0290parts

    75706 or 76094. I believe both of those are D2 cams.

  5. #5
    smcnutt's Avatar
    Join Date
    Dec 2007
    Location
    Indianapolis, IN
    Posts
    1,364
    Post Thanks / Like

    Default Re: 0290parts

    Quote Originally Posted by cgfyl View Post
    Justin,

    Do you have any Cams?
    Go Fish

    Sorry, just couldn't resist
    “Common sense is in spite of, not the result of, education.”
    ― Victor Hugo

  6. #6

    Join Date
    Apr 2015
    Posts
    11
    Post Thanks / Like

    Default Re: 0290parts

    I have 2 cams not sure of pn and how good they are they have the parko coating on them but I cant see any part numbers they are narrow lobe with what looks like small flats on the sides of the lobes so if I remember right that would make these solid lift cams not hydraulic for the d2 I have a few hundred solid lift followers for them.

  7. #7

    Join Date
    Apr 2015
    Posts
    11
    Post Thanks / Like

    Default Re: 0290parts

    if I did this right there should be a pic of the new main case for 0290d2
    Attached Images Attached Images

  8. #8
    cgfyl's Avatar
    Join Date
    Jun 2010
    Location
    Leduc, Alberta Canada
    Posts
    322
    Post Thanks / Like

    Default Re: 0290parts

    Justin,

    What are you wanting for the case and 4 jugs?

  9. #9

    Join Date
    Apr 2015
    Posts
    11
    Post Thanks / Like

    Default Re: 0290parts

    new cylinders
    Attached Images Attached Images

  10. #10

    Join Date
    Apr 2015
    Posts
    11
    Post Thanks / Like

    Default Re: 0290parts

    1000 for the case and make serious offer on cylinders! please. you cant find this stuff like this anymore so I know its worth a lot but at the same time im not trying to get rich.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •