Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
PA-22-150 Master Switch
Hello,
Does anyone know where I can get a new master switch or where to send mine to have it overhauled?
This is the switch below the pilot's seat.
Thank you all for your help.
All the best!
Bob Hubbard
-
Re: PA-22-150 Master Switch
It's the same switch that can be purchased at some marinas tip of the day
-
Re: PA-22-150 Master Switch
It is a common double pole double throw switch. AN3027-1
https://www.aircraftspruce.com/catal...clickkey=86600
-
Re: PA-22-150 Master Switch
I have a working switch removed from a Colt during an upgrade. You are welcome to it.
-
Re: PA-22-150 Master Switch
I switched mine to a circuit breaker toggle switch as part of my alternator conversion field approval. I like the fact I don't have just 2 chances at a reset. By itself I would consider that a minor alteration due to parts availability and do it on a log book entry.
-
Re: PA-22-150 Master Switch
Mr. Dean Dayton. Thank you for your generosity. Please send the switch to my mechanic:
Lee Hepner
7040 East Fouch Rd
Traverse City, Mi. 49684
Let me know the cost/shipping and I'll send you a check.
Thank you again for your help.
Bob Hubbard
248-496-9727
BobHubb1@gmail.com
-
Re: PA-22-150 Master Switch
Originally Posted by
Frank Green
I switched mine to a circuit breaker toggle switch as part of my alternator conversion field approval. I like the fact I don't have just 2 chances at a reset. By itself I would consider that a minor alteration due to parts availability and do it on a log book entry.
So you used Tyco W31 Fuse Breaker Switch or similar as your master switch?? What Amps 35 40??
Gilbert Standard AN3027 DP DT Switch will not have enough amps to handle the load as a master without a solenoid being in place. Think those switches are ratted for max 20 amps. Could be wrong...
Jared
-
Re: PA-22-150 Master Switch
Jared,
you are correct, rated at 20 amps. My bad.
Here a switch rated at 30amps DC 30 volts. Double pole double throw.
http://www.newark.com/eaton/7312k38/...FZU1aQod5MYEBQ
Last edited by Gilbert Pierce; 11-17-2015 at 09:43 PM.
-
Re: PA-22-150 Master Switch
Jared- 30 amp. W31 The alternator is a Denso 40 amp. controlled to 30 amps by a 3 amp. field circuit breaker. The 337s are on Andy Anderson's site. Homer came up with the idea and got the original approval and then i copied it and also got it on a field approval. Works great.
-
Re: PA-22-150 Master Switch
Originally Posted by
Frank Green
Jared- 30 amp. W31 The alternator is a Denso 40 amp. controlled to 30 amps by a 3 amp. field circuit breaker. The 337s are on Andy Anderson's site. Homer came up with the idea and got the original approval and then i copied it and also got it on a field approval. Works great.
Thanks Frank will do that for my master replacement. Gilbert don't be hard on yourself so many damn different switches out there and even I forgot lots of times.
Jared
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules