Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
-
Need wing leading edge tip sheet metal
I need part number 15723-01. This is the leading edge sheet metal at the wing tip for the right wing. I’ll go the Univair route if I have to but if someone can save me a few dollars on a nice used one it would be appreciated.
-
Re: Need wing leading edge tip sheet metal
Originally Posted by
Mushroom
I need part number 15723-01. This is the leading edge sheet metal at the wing tip for the right wing. I’ll go the Univair route if I have to but if someone can save me a few dollars on a nice used one it would be appreciated.
If you have an English wheel, it’s easy to make.
Sent from my iPhone using Tapatalk
-
Re: Need wing leading edge tip sheet metal
Thank you, but I don’t have an English wheel or the sheet metal skills to use it currently.
-
Administrator
Re: Need wing leading edge tip sheet metal
I have an english wheel but that doesn't look very easy to me. Would love to see one made that way. I was going to make a die and take it to my friends with a huge hydraulic press and make some but that hasn't happened yet. If I remember correctly that is 1100 aluminum so is very soft. I have been able to repair quite a few with a shot bag, hammers, dollies and a slapper.
u15723-001__73393.1493153622.1280.1280.jpg
-
Re: Need wing leading edge tip sheet metal
Originally Posted by
Steve Pierce
I have an english wheel but that doesn't look very easy to me. Would love to see one made that way. I was going to make a die and take it to my friends with a huge hydraulic press and make some but that hasn't happened yet. If I remember correctly that is 1100 aluminum so is very soft. I have been able to repair quite a few with a shot bag, hammers, dollies and a slapper.
u15723-001__73393.1493153622.1280.1280.jpg
Make it in upper and lower halves, then weld the two together.
Sent from my iPhone using Tapatalk
-
Re: Need wing leading edge tip sheet metal
Originally Posted by
Steve Pierce
I have an english wheel but that doesn't look very easy to me. Would love to see one made that way. I was going to make a die and take it to my friends with a huge hydraulic press and make some but that hasn't happened yet. If I remember correctly that is 1100 aluminum so is very soft. I have been able to repair quite a few with a shot bag, hammers, dollies and a slapper.
u15723-001__73393.1493153622.1280.1280.jpg
That looks great Steve, but I think mine is probably beyond repair. Someone messaged me with a
private message and said they may have one.
-
Administrator
Re: Need wing leading edge tip sheet metal
Originally Posted by
Mushroom
That looks great Steve, but I think mine is probably beyond repair. Someone messaged me with a
private message and said they may have one.
I can't take credit for the one in the picture, I stole it from the Univair website. Thanks Paul for helping a fellow member out. Kudos to you.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules