Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Results 1 to 9 of 9

Thread: Motor Mount needed

  1. #1

    Join Date
    Mar 2018
    Location
    Wasilla, AK
    Posts
    2
    Post Thanks / Like

    Default Motor Mount needed

    Need a motor mount for a O-320.

    Russ Elliott N10MK

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,454
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Motor Mount needed

    Russ, I have a NOS (New Old Stock) 150/160 hp engine mount, P/N 11786-15. What is wrong with your mount? I have been contemplating building an engine mount jig to repair them since I have several damaged mounts laying around.

  3. #3
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,454
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Motor Mount needed


  4. #4
    JPerkins's Avatar
    Join Date
    Aug 2014
    Location
    Hudson, Maine
    Posts
    1,046
    Post Thanks / Like

    Default Re: Motor Mount needed

    I'll have one coming off my plane in the near future.

    Sent from my SM-G930V using ShortWingPipers.Org mobile app

  5. #5
    efrench's Avatar
    Join Date
    Nov 2015
    Location
    Soldotna, Alaska
    Posts
    189
    Post Thanks / Like

    Default Re: Motor Mount needed

    I also have one crated up and ready to go! Pristine condition!


    Sent from my iPad using ShortWingPipers.Org
    "If you do something; something else will happen. Don't wiggle the controls" Jim Alsip; EAA Webinar Oct 2015

  6. #6
    JPerkins's Avatar
    Join Date
    Aug 2014
    Location
    Hudson, Maine
    Posts
    1,046
    Post Thanks / Like

    Default Re: Motor Mount needed

    It's raining motor mounts!

  7. #7

    Join Date
    Mar 2018
    Location
    Wasilla, AK
    Posts
    2
    Post Thanks / Like

    Default Re: Motor Mount needed

    I PM'd you.

  8. #8

    Join Date
    Apr 2015
    Posts
    6
    Post Thanks / Like

    Default Re: Motor Mount needed

    Steve,
    I am also looking for a motor mount 11786-14 to repair damaged lower mounts. Considering sending out for repair but, looking at all my options. Do you have one and how much would you be willing to sell? Would you also consider taking mine as a core?

  9. #9
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,454
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Motor Mount needed

    I don't have access to the drawing for a week or so. How is the -14 different from the -15. I have not built a jig as of yet, been keeping the welder busy on fuselages.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •