Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Page 8 of 8 FirstFirst ... 678
Results 71 to 71 of 71

Thread: Wagabond build

  1. #71

    Join Date
    Jul 2018
    Location
    North Ridgeville Ohio
    Posts
    42
    Post Thanks / Like

    Default Re: Wagabond build

    I got the rest of the bottom diagonals cut and tacked in. I then did the top diagonal tubes, next I set the tail post in, which was slow going, grinding and fitting and measuring. I used a laser level and a digital level. I then set station 1 (Firewall) in the same way, which took twice as long. I then fit all the tubes from the firewall to station 2 (instrument panel). I ran one weld bead on all joints while it was on table jig. I then removed it from table and set it in a rotisserie.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •