Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Glad these are for certificated aircraft. This is next on my upgrade list.
I made some glovebox doors with a circuit breaker panel for the glovebox on a 50 Pacer. Not using them and they are not far from you if you want. I also have all the bucks that I used to form the panel overlays and cutouts for the glove boxes and the center instrument panel.
Todd
Last edited by Vagabondblues; 01-04-2024 at 07:32 PM.
Beautiful aluminum work reminds me of the Gov't stuff I used to see 30 years ago in another life. So well made, complex, very robust stuff that few can reproduce. I might ask, though, have you doubled the weight of the device in mounting it?
Sorry for the thread drift. These are up for grabs. Made from same thickness as original 1950 Piper pacer glove boxes, just moved the breakers up into the glovebox. With the trig radio and transponder installed its just a fraction of the original Nuclear age Narco Omni glass tube radio which weighed about 65lbs. and had three boxes to operate. The original door latch would not hold it shut, so I made a bracket with two screws to hold it in.
I thought if he was going to upgrade to uavonix AV30C and skysensor he could use them and keep the original look of his aircraft.