Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: Wanted Spinner

  1. #1

    Join Date
    Oct 2018
    Location
    Laharpe, Illinois
    Posts
    13
    Post Thanks / Like

    Default Wanted Spinner

    Need a Tri Pacer Spinner, dome, front and back plate. Dennis Morton

  2. #2
    JPerkins's Avatar
    Join Date
    Aug 2014
    Location
    Cordova, Alaska
    Posts
    708
    Post Thanks / Like

    Default Re: Wanted Spinner

    I have the spinner and back plate if your interested.
    I can get a picture tommorow.
    Jason Perkins

  3. #3

    Join Date
    Oct 2018
    Location
    Laharpe, Illinois
    Posts
    13
    Post Thanks / Like

    Default Re: Wanted Spinner

    That would be good. I hear that some have had the tendency to develop cracks near the holes of the back plate. Thanks Jason.

  4. #4
    JPerkins's Avatar
    Join Date
    Aug 2014
    Location
    Cordova, Alaska
    Posts
    708
    Post Thanks / Like

    Default Re: Wanted Spinner

    I actually have two back plates. The one with the crappy paint job was drilled out to fit an O-360 crank, the other fits the O-320. Both are strait and clean (no cracks or corrosion). The only thing on the spinner itself is a little crack that was stop drilled and filled with what appears to be glazing putty. It gave me no issues when I ran it.

    I'm going to guess to ship it out of Alaska will cost at least $30. PM me your address and what it's worth to you and I can have in the mail today.20190321_094027.jpg20190321_093949.jpg20190321_093955.jpg20190321_093959.jpg

    Sent from my SM-G930V using ShortWingPipers.Org mobile app
    Jason Perkins

  5. #5
    andya's Avatar
    Join Date
    Dec 2007
    Location
    UT47
    Posts
    1,598
    Post Thanks / Like

    Default Re: Wanted Spinner

    I once talked with Univair about prices for front, back plates, spinner.
    Seems like individual parts where pretty pricey. Cost for the Kit, spinner and plates was
    the better deal than individual parts.
    "Progress is our most important problem"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •