Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Likes Likes:  0
Results 1 to 2 of 2

Thread: Making Owner Mfg. Parts - D Window Frames for a Piper Colt Project

  1. #1

    Join Date
    Jun 2017
    Location
    PNW
    Posts
    18
    Post Thanks / Like

    Default Making Owner Mfg. Parts - D Window Frames for a Piper Colt Project

    In Post #36 of this thread, I discussed with some of you how the D window frames might be made on a DIY basis. I tried the methods discussed in that thread, but had no real success. Subsequently I came across another method which I've tried, and which I think will work. I describe the making of these in a bit of detail in the PDF linked below for anyone who may be interested. I didn't want to fill of a lot of space here, hence the PDF. Being new here, I hope that will be OK?

    OWNER MFG PARTS - D WINDOW FRAMES.pdf

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    11,793
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Making Owner Mfg. Parts - D Window Frames for a Piper Colt Project

    Nice work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •