Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 1 of 1

Thread: tail fin fit to tail post-- how loose ?

  1. #1

    Join Date
    May 2019
    Post Thanks / Like

    Default tail fin fit to tail post-- how loose ?

    Now that I have removed the fin from the post-- and cleaned the post inside-- when I insert the fin-- I can wiggle the fin
    a little bit. How much slack there is acceptable before you replace the post ? It MAY have has a piece of shim stock in it when
    I cleaned it. Is it normal for it to have a little wiggle ? (maybe 1/8 inch about 1 foot up from the joint---)


    PS I am trying to "delete" this but I cant find the button …………….
    Last edited by violinmaker; 06-13-2019 at 01:12 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts