Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
Likes:
0
-
throttle/mixture clamp
Replaced my throttle clamp with a new one. The one I had was hacked together and backwards per the drawings.
Haven’t been able to rig without using the closest hole to the throttle plate. The problem with this is little movement of the control results in big rpm changes. Have tried everything including using a rod end and different fork.
Any advice or alternatives out there
Never like the piper design
-
Re: throttle/mixture clamp
What is the rigging problem for the other holes? Too much of a bind to work smoothly or cannot get full travel?
-
Administrator
Re: throttle/mixture clamp
Did you adjust the throttle arm on the carburetor?
-
Administrator
Re: throttle/mixture clamp
Here are some pictures I took of our Tri-Pacer. Using the second hole in the throttle arm.
IMG_20190622_071955.jpgIMG_20190622_072003.jpgIMG_20190622_072028.jpg
Sent from my Pixel 2 XL using ShortWingPipers.Org mobile app
-
Administrator
Re: throttle/mixture clamp
And some more I found.
100_0048.JPG
100_0064.JPG
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules