Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Trouble buying SWPC drawings disk

  1. #1

    Join Date
    Oct 2018
    Location
    West Arkansas
    Posts
    76
    Post Thanks / Like

    Default Trouble buying SWPC drawings disk

    Morning, cant access the SWPC website to buy the drawings disk, any one got contact info to do it by phone?

  2. #2

    Join Date
    Dec 2008
    Location
    Nikiski , Alaska 99669
    Posts
    264
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    Fly safe fly low fly slow

  3. #3
    Wag-builder's Avatar
    Join Date
    Jan 2015
    Location
    Charlotte Hall, Maryland
    Posts
    128
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    If you still have trouble with the SWPC website, please call me directly and we will sort out what ever the problem is.

    Steve Carruthers
    (301) 221-6315
    President SWPC

  4. #4

    Join Date
    Oct 2018
    Location
    West Arkansas
    Posts
    76
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    Okay, used the airport computer today, chrome, no problems. Xmas is early! Got the drawing and rigging disc.

  5. #5

    Join Date
    May 2010
    Posts
    19
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    I have looked at buying the CD several times and it shows out of stock. I would order one today if I could.

  6. #6
    andya's Avatar
    Join Date
    Dec 2007
    Location
    UT47
    Posts
    1,627
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    I'm guessing it might be helpful to skip the website and call Steve Carruthers (301) 221-6315 President SWPC, direct
    "Progress is our most important problem"

  7. #7

    Join Date
    Oct 2018
    Location
    West Arkansas
    Posts
    76
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    My issue was pop up blocker/firewall etc. Talked to Steve, great guy, order went without a hitch on a less protected computer.

  8. #8

    Join Date
    May 2018
    Location
    Portland OR
    Posts
    51
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    So the fact that there is a pop up blocker makes it show as sold out?

    Sent from my LM-X210(G) using Tapatalk

  9. #9
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    12,118
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Trouble buying SWPC drawings disk

    Quote Originally Posted by krwill View Post
    So the fact that there is a pop up blocker makes it show as sold out?
    Probably not. The store front software I use has you enter a quantity on hand and it counts down as you sell it. I am bad about not updating the quantity on hand so I turned that feature off to eliminate the confusion.

  10. #10

    Join Date
    May 2018
    Location
    Portland OR
    Posts
    51
    Post Thanks / Like

    Default Re: Trouble buying SWPC drawings disk

    Quote Originally Posted by Steve Pierce View Post
    Probably not. The store front software I use has you enter a quantity on hand and it counts down as you sell it. I am bad about not updating the quantity on hand so I turned that feature off to eliminate the confusion.
    That makes sense. I hadn't even tried to order because they show as sold out. Guess I just need to try. I would have pushed it more but I haven't wanted to deal with the next issue that it's on a disk. I'll have to pull an old computer out of moth balls to even open it, I haven't had a computer with a drive in quite a few years.

    Sent from my LM-X210(G) using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •