Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Results 1 to 5 of 5

Thread: Gdl 82

  1. #1

    Join Date
    Oct 2014
    Location
    Fort Mohave, AZ
    Posts
    11
    Post Thanks / Like

    Default Gdl 82

    Has anyone installed the garmin GDL82 in their shortwing?
    Looking for a copy of the 337 and flight manual supplement

    Thanks

  2. #2
    Gilbert Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Germantown, Tennessee 01TN
    Posts
    3,163
    Post Thanks / Like

    Default Re: Gdl 82

    The flight manual supplement and 337 are both available on Garmins site. https://support.garmin.com/support/m...=en&country=US

    pm me your email and send you copies of mine.

  3. #3

    Join Date
    Jun 2018
    Location
    Moses Lake, WA
    Posts
    7
    Post Thanks / Like

    Default Re: Gdl 82

    If you look up FAA technical paper AFS-360-2017-1 you'll find sample 337's and and flight manual supplements in the back.

  4. #4
    idahopacer's Avatar
    Join Date
    Aug 2009
    Location
    McCall, Idaho, United States
    Posts
    145
    Post Thanks / Like

    Default Re: Gdl 82

    Gilbert did you do the install yourself?
    Bob Didisse, McCall, ID.

  5. #5
    Gilbert Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Germantown, Tennessee 01TN
    Posts
    3,163
    Post Thanks / Like

    Default Re: Gdl 82

    Quote Originally Posted by idahopacer View Post
    Gilbert did you do the install yourself?
    Yes I did. I took the easy way out and got a harness from Spruce. If you decide to that let me know and I will tell you how to make life easier. They sent the harness set up for a GPS output to an external device like a fuel flow computer. They included all the necessary wires but did not install them in the Mini DB15. I wanted the ANON switch capability so I had to add those wires. They came all nicely labeled with pins on them. All I had to do was remove the wires I didn't want and add the ones I did. Not a big deal but they didn't include the pin puller installer like they are supposed to. They wired the USB dongle which made the installation easier. You do have to construct your own coax from the antenna to the GDL82 Box. and cut the coax from the Transponder to the antenna and add a couple of BNC connectors.
    I can also send you all the necessary paper work. I takes two 337's and a supplement to your Airplane Flight Manual.
    I thought you installed an Appareo ESG ADSB-OUT?
    Last edited by Gilbert Pierce; 11-03-2019 at 08:19 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •