Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Landing gear bungees

  1. #1

    Join Date
    Jun 2012
    Location
    Utah
    Posts
    91
    Post Thanks / Like

    Default Landing gear bungees

    My 1951 PA-20 has one bungee on each side, but it seems like most have two. Any recommendations going forward? should i replace with two or go with the one?

  2. #2

    Join Date
    Aug 2010
    Location
    Grain Valley, MO (E. Kansas City)
    Posts
    62
    Post Thanks / Like

    Default Re: Landing gear bungees

    The 51 pacer had Narrow gear from the factory, so less leverage outward, I suspect you likely went to the wide gear, pretty much the "go to" standard for that is a pair of 1080HD's but opinions vary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •