Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Torque for Prop and Prop Spacer Bolts - O-235

  1. #1
    Clipper Driver's Avatar
    Join Date
    Apr 2009
    Location
    Somers, CT
    Posts
    38
    Post Thanks / Like

    Default Torque for Prop and Prop Spacer Bolts - O-235

    Can anyone give me the torque for the prop bolts and shorter bolts fastening the prop spacer to the crankshaft flange? Also, safety wire diameter for the shorter bolts. Engine is O-235, prop is McCauley Aluminum prop.

    Thanks in advance!!
    Best Regards,

    John
    PA-16 Clipper N5216H

  2. #2

    Join Date
    Aug 2012
    Location
    Kewanee, IL
    Posts
    39
    Post Thanks / Like

    Default Re: Torque for Prop and Prop Spacer Bolts - O-235

    https://mccauley.txtav.com/-/media/m...18456CD042EA91

    Here is the approved data. Bottom of page 4. Safety wire is supposed to be largest size you can fit into the hole. Usually .041 for propellers.

  3. #3

    Join Date
    Mar 2017
    Location
    Frederick MD
    Posts
    570
    Post Thanks / Like

    Default Re: Torque for Prop and Prop Spacer Bolts - O-235

    The prop TCDS says to install per McCauley drawing C-1211. Suggest you find a copy of the drawing, sorry I donít have a copy.


    Sent from my iPad using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •