Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: Posting to the Tech Library?

  1. #1
    Glen Geller's Avatar
    Join Date
    Dec 2007
    Location
    Beaverton, Oregon, United States
    Posts
    1,462
    Post Thanks / Like

    Default Posting to the Tech Library?

    Hi Folks, I have info I want to post on the "other" bungee tool, what we call the Bungee Boss.
    This is the flip-over bungee tool built with a small car jack.
    It's exactly what is shown in this video: https://youtu.be/rgL5JGSy748
    I have a measured drawing (sketch) and several photos, they are a little large to post in the forums I think so I thought I would post it to the Tech Libray and link to it in a post.

    I cannot for the life of me figure out where I upload to that section.

    Really enjoyed the Steve and Steve show on YouTube tonight, thanks so much for that.

    Glen in Oregon
    Glen Geller
    1955 PA22-150 "One For Papa!"

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,454
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Posting to the Tech Library?

    Glen, Email me your documents and I can add it. There is also a good bungee thread you can post it in.

    Hopefully the presentation last night will save someone from making some of the mistakes my friends and I have made.

  3. #3
    Pacerfgoe's Avatar
    Join Date
    Nov 2009
    Location
    Salmon Arm BC
    Posts
    910
    Post Thanks / Like

    Default Re: Posting to the Tech Library?

    HEY!!!!that's me in that video, I hope I get some credit at the end of your presentation....LOL! And I don't need to hear anymore snarky remarks about the shaky table I was working on, I've heard them all

    I got the idea to build this tool from Lou, LOWNSLOW here on the forum. He showed a picture of it in one of his posts and I just built my own tool and made the vid. I always give Lou and his brother credit for the design of the tool.

  4. #4
    Glen Geller's Avatar
    Join Date
    Dec 2007
    Location
    Beaverton, Oregon, United States
    Posts
    1,462
    Post Thanks / Like

    Default Re: Posting to the Tech Library?

    Thanks Forrest, I think you or maybe Lou actually sent me the drawing and some photos of that several years ago, that's what i wanted to post.
    My buddy welded up a Bungee Boss and we use it at least once a year (seven Shortwings in our group in Hillsboro OR) so we got really good at it!
    I wrote a little tutorial about lifting the plane and R&R'ing the hydrosorbs, so there can be a full package for folks in the Tech Library.
    I was able to resize the photos so I will post it to the existing bungee thread as well.

    Best,
    GG
    Glen Geller
    1955 PA22-150 "One For Papa!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •