Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  1
Results 1 to 4 of 4

Thread: Need Wing Spar Material

  1. 08-19-2020, 11:50 AM #1
    wyandot jim
    wyandot jim is offline
    Join Date
    Jun 2012
    Location
    Richmond, Texas
    Posts
    1,046
    Post Thanks / Like

    Default Need Wing Spar Material

    Hey Guys,
    Son and I just bought a PA-11 that has some wing tip damage. So we need some
    spar material to allow us to do the Piper Spar Splice. We need a 2' piece of a front and rear spar. If you have the wing tip pieces that already have the web removed that would be great. If not a 2' section with the web in would also work fine.
    Thanks,
    Jim
    Reply With Quote Reply With Quote
    0 0
     
  2. 08-21-2020, 11:50 PM #2
    wyandot jim
    wyandot jim is offline
    Join Date
    Jun 2012
    Location
    Richmond, Texas
    Posts
    1,046
    Post Thanks / Like

    Default Re: Need Wing Spar Material

    Hey Guys,
    I do believe that I have found the spar material.

    Thanks so much from the ones here that have offered theirs.
    Keep M Flying
    Jim
    Reply With Quote Reply With Quote
    0 0
     
  3. 08-22-2020, 06:46 AM #3
    Steve Pierce
    Steve Pierce is offline
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,472
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Need Wing Spar Material

    Been working with your son and grandson the last two days hanging that engine. They just need to come pick through the pile and cut two off. You mised a good work party with lots of ribbing. Sasser hates it when we trim carbon fiber in front of the fan.
    Steve Pierce

    Support Short Wing Pipers.org- Click Here To Find Out More.
    Reply With Quote Reply With Quote
    0 1
     
  4. 11-17-2020, 08:34 PM #4
    Nate_Lynch
    Nate_Lynch is offline
    Join Date
    Oct 2020
    Posts
    2
    Post Thanks / Like

    Default Re: Need Wing Spar Material

    I am also looking for some front and rear spar material for a PA-22. I'm looking for 2-3' of each. Does anyone have any to sell?
    Reply With Quote Reply With Quote
    0 0
     
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules