Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
-
Re: Rudder arm
Originally Posted by
clipquito
Thanks. I misspoke ... will get the rudders even with the cables. What I meant to say is the cutting of the post will even out the rudder travel. At the moment left rudder deflection is 32 degrees and right rudder deflection is 16 degrees. Cutting the longer post will make both rudder deflections 32 degrees. Have checked TC. Should be 16 degrees deflection, but I cant get that. Would rather have them be even and have more rudder travel than uneven travel.
So you should have a tube welded on the short one to give you the published limit, not cut the one that is correct!
Sent from my iPad using Tapatalk
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules