Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
I got tired of my old Hydrasorb/Gear leg covers which have been patched up and repaired many times. I always found it a pain to bend the ends up and down to get them around the gear legs and always ended up with adding scratches to the paint.
I fabricated new covers and split them where they go around the gear legs. I used 0.040 Aluminum, but they don't really need to be that thick. Now I just need to take a couple of screws off and take the covers off without scratching the gear legs. I still need to paint them.