Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!
Thanks:
0
-
aileron flap jig
hello does anyone have pictures or a drawing for a jig to hold the components to build flaps or ailerons thanks Rocket204
-
Administrator
I used some old aileron hinges and a piece of square tubing. I would want the drawings on hand because they do have twist. I installed an upright with angle to catch the trailing edge and hold the twist as I rivet the leading edge skins on.
DSC00376.jpgDSC00372.jpgDSC00377.jpg
-
-
Administrator
Re: aileron flap jig
-
Re: aileron flap jig
Very cool. Can you say "Not Square by Design".
Last edited by Subsonic; 11-30-2020 at 07:53 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules