Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 51

Thread: Trim Indicator Support Panel

  1. #1
    CTJER's Avatar
    Join Date
    Jun 2012
    Location
    Rockford, IL
    Posts
    246
    Post Thanks / Like

    Default Trim Indicator Support Panel

    I'm getting ready to replace the headliner in my Colt. Haven't pulled it yet but research indicates the support panel for the trim indicator is missing. Part number 12103. Looks like the indicator panel is held in place by the crank shaft and the indicator itself. Univair out of stock. I see one on eBay, but it looks rough.

    Any one have a source or stock? Drawing?

    Jerry

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,475
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Trim Indicator Support Panel

    Do you have the drawing CD and did you look there?

  3. #3
    Glen Geller's Avatar
    Join Date
    Dec 2007
    Location
    Beaverton, Oregon, United States
    Posts
    1,465
    Post Thanks / Like

    Default Re: Trim Indicator Support Panel

    Hi Jerry,
    The part on ebay does not look at all rough, just needs the glue cleaned off and then paint it if you like.
    $39 plus shipping, that's cheap in the airplane world!

    https://www.ebay.com/i/113694941147?...saApvyEALw_wcB

    GG
    Last edited by Glen Geller; 10-28-2020 at 05:16 PM.
    Glen Geller
    1955 PA22-150 "One For Papa!"

  4. #4
    CTJER's Avatar
    Join Date
    Jun 2012
    Location
    Rockford, IL
    Posts
    246
    Post Thanks / Like

    Default 12103-00 trim indicator support

    I've renewed my search for this part. Anyone know where to find one or drawings?

    Jerry

  5. #5

    Join Date
    Mar 2017
    Location
    Frederick MD
    Posts
    1,954
    Post Thanks / Like

    Default 12103-00 trim indicator support

    Quote Originally Posted by CTJER View Post
    I've renewed my search for this part. Anyone know where to find one or drawings?

    Jerry
    There is one on eBay right now for $9.00

    Sent from my iPad using Tapatalk

  6. #6
    CTJER's Avatar
    Join Date
    Jun 2012
    Location
    Rockford, IL
    Posts
    246
    Post Thanks / Like

    Default Re: 12103-00 trim indicator support

    Quote Originally Posted by dgapilot View Post
    There is one on eBay right now for $9.00

    Sent from my iPad using Tapatalk
    Can you post a link? I can't seem to find it.
    Thanks.

  7. #7
    Gilbert Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Germantown, Tennessee 01TN
    Posts
    4,434
    Post Thanks / Like
    Last edited by Gilbert Pierce; 08-05-2021 at 04:50 PM.

  8. #8
    CTJER's Avatar
    Join Date
    Jun 2012
    Location
    Rockford, IL
    Posts
    246
    Post Thanks / Like

    Default Re: 12103-00 trim indicator support

    Not having much luck with eBay. Would appreciate if anyone could provide a picture of the part or the installation. Mine was clearly a jury rigged install.
    Jerry

  9. #9

    Join Date
    Nov 2007
    Location
    Beagle, Oregon (Medford) United States
    Posts
    1,312
    Post Thanks / Like

    Default Trim Indicator Support Panel

    These were simply glued to the back side of the headliner with contact cement…



    The very front has the end bent up so it can straddle the front trim pulley mount to keep it from twisting…



    I have several of these since they are removed when installing a skylight…



    Shoot me an address and you can have one for the shipping.. calling would be ideal.. 541-826-9729

    Brian


    Sent from my iPhone using Tapatalk

  10. #10
    CTJER's Avatar
    Join Date
    Jun 2012
    Location
    Rockford, IL
    Posts
    246
    Post Thanks / Like

    Default Re: Trim Indicator Support Panel

    Quote Originally Posted by stevesaircraft(Bri) View Post
    These were simply glued to the back side of the headliner with contact cement…



    The very front has the end bent up so it can straddle the front trim pulley mount to keep it from twisting…



    I have several of these since they are removed when installing a skylight…



    Shoot me an address and you can have one for the shipping.. calling would be ideal.. 541-826-9729

    Brian












    Sent from my iPhone using Tapatalk
    Will call later today.

    Jerry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •