Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Aileron stop horn

  1. #1

    Join Date
    Jun 2012
    Post Thanks / Like

    Default Aileron stop horn

    I am reinstalling my aileron stop horn after removing them during recover, and the left and right seem to be identical, when i install them they also seem to give me more travel down than up and don't really seem to line up perfectly where they strike the aileron horn. I looked in the TCDS and found the up and down travel to be 15 Deg up and 15 Deg down, doesn't seem right? does anyone know the drawing number for the aileron stop horn?

    Any Help, please

    Last edited by bobbynick@msn.com; 01-11-2021 at 02:44 PM.

  2. #2
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Graham, Texas, United States
    Post Thanks / Like
    Blog Entries

    Default Re: Aileron stop horn

    It is the part number of the aileron stop. There is a #4 PK screw on each one. If you used the same aileron hinges you should be able to figure out where they were when they were removed using those holes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts