Welcome! Becoming a registered user of ShortWingPipers.Org is free and easy! Click the "Register" link found in the upper right hand corner of this screen. It's easy and you can then join the fun posting and learning about Short Wing Pipers!

Thanks Thanks:  0
Results 1 to 9 of 9

Thread: Clipper cabin heat intake fitting

  1. #1
    blue44's Avatar
    Join Date
    Apr 2018
    Location
    Sky Acres 44N
    Posts
    201
    Post Thanks / Like

    Default Clipper cabin heat intake fitting

    Gents, having some remedial repairs done to the Clipper lower cowling, and the fitting at the cabin heat air intake is in need of r&r. It's angled to miss the exhaust and sends air to a 2" scat hose. Not seeing anything on Wag or Univair, think it might be available or must we fabricate ? Cheers
    Donn
    1949 Clipper PA-16 O-235

  2. #2

    Join Date
    Mar 2017
    Location
    Frederick MD
    Posts
    1,947
    Post Thanks / Like

    Default Re: Clipper cabin heat intake fitting

    Part Number 10400. It isn't in the Shortwing CD, but it is on line at the Unofficial SuperCub drawing site. A3290453.pdf (supercubproject.com)

  3. #3

    Join Date
    Mar 2017
    Location
    Frederick MD
    Posts
    1,947
    Post Thanks / Like

    Default Re: Clipper cabin heat intake fitting


  4. #4
    blue44's Avatar
    Join Date
    Apr 2018
    Location
    Sky Acres 44N
    Posts
    201
    Post Thanks / Like

    Default Re: Clipper cabin heat intake fitting

    that's great thanks...
    Donn
    1949 Clipper PA-16 O-235

  5. #5
    Jim's Avatar
    Join Date
    Nov 2007
    Location
    Fennville, MI
    Posts
    1,172
    Post Thanks / Like

    Default Re: Clipper cabin heat intake fitting

    Hi,

    I made a scoop that upped the volume of air brought in. Maybe mock up a cardboard and duct tape version and see if you like what happens.

    20210524_122401.jpg

  6. #6
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,454
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Clipper cabin heat intake fitting

    I have the whole assembly if needed, removed when Sutton exhaust system was installed.

  7. #7
    Pacer42Z's Avatar
    Join Date
    Feb 2008
    Location
    Winchester, VA
    Posts
    1,068
    Post Thanks / Like

    Default Re: Clipper cabin heat intake fitting

    Quote Originally Posted by blue44 View Post
    Gents, having some remedial repairs done to the Clipper lower cowling, and the fitting at the cabin heat air intake is in need of r&r. It's angled to miss the exhaust and sends air to a 2" scat hose. Not seeing anything on Wag or Univair, think it might be available or must we fabricate ? Cheers
    I have the adapter and the scoop from when I changed to the Sutton exhaust. Send me a PM with your address and I can mail it to you free of charge.

    Juergen
    Pacer N3342Z
    Attached Images Attached Images

  8. #8
    Administrator Steve Pierce's Avatar
    Join Date
    Nov 2007
    Location
    Graham, Texas, United States
    Posts
    15,454
    Post Thanks / Like
    Blog Entries
    1

    Default Re: Clipper cabin heat intake fitting


  9. #9
    Jim Hann's Avatar
    Join Date
    Mar 2013
    Location
    Ballwin (St. Louis), Missouri
    Posts
    1,609
    Post Thanks / Like

    Default Re: Clipper cabin heat intake fitting

    I have one of these sitting around from my Sutton conversion.
    Quote Originally Posted by Steve Pierce View Post
    1957 PA-22/20 "Super Pacer" based 1H0
    Lifetime EAA member
    Vintage Aircraft Association member
    Lifetime EAA Chapter 32 member


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •